A grease trap holds back floating grease and settled food solids while wastewater passes through. As those layers build, they leave less room for water and can reach the outlet. Slow drains or a backed-up trap can disrupt prep and cleanup, though a blocked line can cause similar trouble. A pump-out removes the accumulated waste; the trap may also need cleaning around its baffles and outlet tee. Call to describe what you are seeing to a provider in your area.
Call (877) 704-1271 to reach a provider →
What a pump-out removes
A pump-out removes the floating grease, settled solids, and wastewater held in the trap or interceptor. Taking out the full contents matters because grease left on top and food waste left on the bottom can reduce the space available for flow.
Ask what cleaning is included after pumping. General practice includes scraping buildup from the walls and baffles, then checking that the inlet and outlet tee are clear and in place. A damaged baffle or tee may need separate attention.
- Floating grease near the surface
- Food solids settled on the bottom
- Buildup around walls, baffles, and the outlet tee
The 25 percent rule and how frequency is set
Many local authorities use what is often called the 25 percent rule. Under that guideline, pumping happens before the combined depth of floating grease and settled solids reaches 25 percent of the trap’s total liquid depth.
That depth depends on what the kitchen sends down the drain. A fryer-heavy kitchen can reach 25 percent in a couple of weeks, while a light-prep kitchen may take far longer. Past pump-out logs and measured buildup help show how your trap behaves.
Your city or sewer district sets the schedule that applies to your kitchen. Ask the provider how buildup is measured and keep the measurement with your pump-out log so you can compare it with the next visit.
What the provider should leave you
After a pump-out, keep paperwork that shows what was removed and where it went. Ask the provider which records your kitchen should retain under local requirements. These details also help you track buildup between visits.
- A waste manifest showing the pickup and disposal details
- A service log entry with the date and work performed
- Any recorded grease and solids measurements
- Notes about a damaged baffle or outlet tee
Keep the manifest and log entry with your kitchen records. If an inspection is coming, having them together makes it easier to show the trap’s service history.
Signs you are overdue
- Standing water in the sink that drains slowly
- Grease odors near the trap or floor drain
- Water rising in a drain during cleanup
- Grease visible near the outlet tee
- Pump-out logs showing more buildup at each visit
These signs can mean the trap is due for pumping. If water is backing up, describe where it appears and whether other drains are affected during a call to a provider. That information helps them discuss what service may be needed.
What happens to the waste after pumping
The material removed from a grease trap is a mix of grease, food solids, and wastewater. It is hauled away for handling at an appropriate receiving facility. It should not be returned to a sink, drain, or outdoor area.
The waste manifest records the pickup and disposal information. Keep it with the service log so you can account for what left the kitchen. If you have a shared interceptor, ask where those records will be kept and who will receive a copy.
What affects the price of a pump-out
The price can depend on the trap or interceptor’s capacity, how much waste has built up, and how easily the access covers can be reached. Cleaning around baffles, clearing an obstructed opening, or handling an unusual amount of solids may affect the work involved. When you call, describe the equipment’s location, any access problems, and the symptoms you see so the provider can discuss pricing.
Grease trap pumping questions
How do I know when my trap was last pumped?
Check your service log and waste manifests for the last pump-out date. If you cannot find them, ask whoever keeps the kitchen’s maintenance records. The previous provider may also have a record you can request by phone.
Does pumping include cleaning the walls and baffles?
That depends on the work discussed with the provider. Ask whether the pump-out includes removing buildup from the walls and baffles and checking the outlet tee. Have any damage or heavy buildup noted in the service log.
Can I set up a recurring pumping schedule?
You can ask a provider about recurring service by phone. Your city or sewer district sets applicable requirements, while your kitchen’s grease and solids buildup helps determine when service is needed. Keep measurements and pump-out dates in the log.
Do I need to be on site during the pump-out?
Ask the provider what access they need to the trap, interceptor covers, and service records. Someone at the kitchen may need to show where the equipment is and receive the manifest or log entry afterward.